PROCESS OPTIMIZATION FOR CATALYTIC REFORMING

Main Article Content

Melikov E.A.

Abstract

In this article, on the basis of a comprehensive analysis and study of the complex processes features occurring in a catalytic reforming installation for primary oil refining, the development of a physically based mathematical formulation of the problem for the optimizing the functioning of one of the main and important blocks of the plant under study, namely the reactor block, is considered.

Article Details

How to Cite
Melikov E.A. (2022). PROCESS OPTIMIZATION FOR CATALYTIC REFORMING. Journal of Engineering and Technology Development Research, 1(1). Retrieved from https://a-publish.com/ojs/index.php/jetdr/article/view/25
Section
Artciles

References

Speight, J.G. The Chemistry and technology of petroleum/ J.G.Speight, H.Heinemann. Boca Raton: CRC Press., 2014, pp. 213-235.

Gulyaev V.A., Lastovkin G.A., Ratner E.M./ Industrial installations of catalytic re-forming, “Chemistry”, Russia, 2005, pp. 278 ÷286.

Chaudhuri U.R. Fundamentals of Petroleum and Petrochemical Engineering/ U.R. Chaudruni, California: CRC Press, 2011, pp, 204-216.

Efendiev I.R./ One optimization problem for nostationary chemical reactors. Automation and remonts control. New York, July 15, 2006, pp. 111-115.

Pakhomov A.N., Konovalov V.I., Gatapova N.Ts., Koliukh A.N. / Fundamentals of modeling chemical-technological systems. Textbook, Tambov, 2008, pp. 145-156.